What is Temperature monitoring

What is  Temperature monitoring

To measure the oral temperature, first take conventional procedures to prevent infection and ensure patient safety.  Explain the procedure to the patient so that they understand what will happen and may completely cooperate.  Next, make sure the thermometer is working properly and ready to use.  To disinfect the thermometer, wipe it with an alcohol swab before carefully placing it in the patient's mouth, usually beneath the tongue, using proper technique to obtain an accurate reading.

Ask the patient to elevate their tongue, and then gently place the thermometer into their mouth, with the bulb end under the tongue and slightly to one side.  Instruct the patient to gently tighten their lips around the thermometer without biting it, ensuring it stays in the appropriate position for an accurate reading.  If the patient is unable to properly hold the thermometer, a different method of temperature measurement should be employed to acquire an accurate result.

Keep the thermometer in place until the digital thermometer beeps, signaling that the reading is complete.  Stay with the patient if you suspect they will have difficulties keeping their mouth closed, ensuring their safety and proper placement.  When the measurement is complete, remove the thermometer from the patient's mouth and read the temperature shown on the instrument, accurately documenting it for documentation.

After taking the temperature, properly clean the thermometer before returning it to its protective casing.  Ensure that the patient is positioned comfortably and safely.  Finally, dispose any dirty or single-use goods in the designated containers, following standard infection control measures.

Axillary

AXILLARY, To measure the axillary temperature, follow conventional procedures to prevent infection and for patient safety.  Explain the procedure to the patient so that they understand what will happen and can cooperate.  Next, check the thermometer to confirm it is working properly.  Remove the patient's arm from clothing, and if the axillary area is moist with perspiration, gently pat it dry with a towel for an accurate reading.

Place the thermometer's bulb in the center of the armpit, vertically, to ensure full contact with the skin and an accurate reading.  Then, lay the patient's arm across the chest or abdomen to keep the thermometer securely in place.  If the patient is unconscious or too weak to assist, you may need to hold the arm yourself to ensure that the thermometer is properly placed throughout the measurement.

Keep the thermometer in place until it beeps, signaling that the measurement is complete.  Stay with the patient while the thermometer is in place to ensure it is properly positioned.  After the reading is complete, remove the thermometer from beneath the patient's arm and correctly read the temperature from the device.

After taking the axillary temperature, properly clean the thermometer before returning it to its protective housing.  Ensure that the patient is positioned comfortably and safely.  Discard any soiled or single-use products in the designated containers, following infection control standards.  Finally, describe the procedure, including the temperature reading, the location used, and any observations about the patient's health.